Edmonton Custom Cabinets brings 20+ years of cabinetry experience to custom bathroom vanity cabinets in Edmonton, Alberta. We design floating vanities, double-sink cabinets, Shaker-style doors, moisture-resistant finishes, soft-close drawers, and storage that makes better use of a small bathroom. According to KOHLER Canada, standard bathroom vanities commonly range from 24 to 60 inches wide, so even a modest change in width can add useful storage.
Family bathrooms and ensuites both need storage that works around the plumbing, not against it. Proper clearances, moisture-resistant materials, and accurate measurements help prevent expensive installation problems later, whether you are updating a compact powder room or a larger family bathroom.
Get the numbers you need to plan with confidence—no pressure, just clear and honest pricing.

Floating bathroom vanities create a clean, modern look and free up floor space in a smaller Edmonton bathroom. Secure wall mounting is essential.
Canadian Woodworking describes one custom floating vanity design that uses ¾-inch plywood backing secured with lag bolts into two wall studs. From a compact powder room to a modern ensuite, a properly anchored floating cabinet can improve access, make the floor easier to clean, and remove a bulky base.

A double-sink bathroom vanity gives two people separate washing space and adds drawer and countertop storage, which is useful in a shared family bathroom.
According to KOHLER Canada, 60-inch vanities are an industry-standard size for two sinks, while 36–48-inch units typically suit smaller layouts. Plumbing placement, sink spacing, and drawer clearance still have to be measured in the actual room.

Custom storage is useful when everyday items disappear into a deep cupboard under the sink.
Custom bathroom storage vanities can use deep drawers, adjustable dividers, and under-sink compartments that work around the plumbing. Blum Canada says its TANDEM concealed drawer runners support up to 30 kg, with available lengths ranging from 250–750 mm. Choosing compatible hardware and planning around the P-trap helps turn a cramped vanity into organized storage.

A custom vanity starts with accurate measurements. Sink placement, plumbing locations, door swings, and available floor space should be checked before the cabinet is designed.
KOHLER Canada states that standard bathroom vanities range from 24–60 inches wide, with 36–48-inch models considered midsize. Measuring wall clearances and drawer openings in an Edmonton bathroom helps avoid fitting problems, especially in a small room where every inch counts.

Floating and floor-standing vanities both need proper support, accurate levelling, and solid construction.
According to IKEA Canada's bathroom installation guidance, a pre-installation inspection checks the bathroom against the proposed layout before installation begins. Floating vanities also need suitable wall framing and mounting hardware. If you are planning a larger renovation, our kitchen cabinet installation service follows similar principles of careful fitting and secure mounting.

Sink cutouts, faucet holes, and drain locations must line up before the vanity is installed.
The City of Edmonton says permits are not required for minor cosmetic upgrades such as installing cabinets, but separate trade permits are required for plumbing, gas, or electrical work. Choosing between undermount, vessel, and drop-in sinks also affects cabinet clearances and countertop preparation. If the plumbing layout is off, new drawers may not close as planned.

A custom bathroom vanity is not finished until every drawer, door, and faucet works properly. Uneven gaps, loose handles, or drawers that rub against the plumbing need to be adjusted.
According to Blum Canada, its CLIP top BLUMOTION hinges provide three-dimensional adjustment for height, depth, and side-to-side alignment. Final checks should also include sink drainage, water connections, drawer clearance, and soft-close operation, so the vanity works as well as it looks.

A custom bathroom vanity does more than hide the plumbing and hold a sink. It can add storage, improve access, and help protect the cabinet from moisture. According to Health Canada, indoor humidity should stay between 30% and 50%, and moisture-resistant materials are recommended for bathrooms. Sealed cabinet edges, water-resistant finishes, and practical drawer layouts help keep everyday items organized and reduce the risk of water damage.

Vanity costs can rise when plumbing has to be moved, countertops need to be modified, or the cabinet does not match the existing space. The Government of Alberta recommends written contractor estimates covering six key details, including material specifications, project timelines, itemized costs, and payment terms. Keeping the existing plumbing locations and choosing a vanity sized to the room can help limit extra labour.
Custom bathroom vanity cabinets in Edmonton from Edmonton Custom Cabinets are published at $2,500–$10,000+ installed. The range depends on a floating or floor-mounted design, single or double sinks, linen towers, drawer layout, and plumbing clearances. An Edmonton-area cabinetry supplier lists installed 60-inch double vanities at about $3,300–$5,400 before countertops, which is a regional benchmark rather than our quote. Plumbing work is priced separately, and we confirm your Edmonton estimate after measuring the bathroom.
Yes, custom bathroom vanity cabinets in Edmonton can be designed around existing plumbing. A custom vanity can be built around sink drains, P-traps, water lines, wall locations, and nearby fixtures instead of wasting most of the cabinet interior. Options include U-shaped sink drawers, offset drawer boxes, floating vanities, double-sink cabinets, and linen towers. Keeping the existing plumbing positions can also limit extra renovation labour. Accurate measurements should include width, depth, height, drawer clearance, and adjacent fixtures before the vanity is ordered.
Installing custom bathroom vanity cabinets in Edmonton does not need a permit on its own, but plumbing changes do. The City of Edmonton says permits are not required for maintenance or minor cosmetic upgrades such as installing cabinets. Separate trade permits are required for plumbing, gas, or electrical work. Simply installing a vanity cabinet, without changing the piping, is often treated as cabinetry. If you are moving a sink or altering the plumbing, check with the City of Edmonton before work starts.
For a double sink, custom bathroom vanity cabinets in Edmonton are usually planned at 60 inches wide. According to KOHLER Canada, 60-inch vanities are an industry-standard size for two sinks, while 36- to 48-inch units typically suit smaller layouts. Standard vanities commonly range from 24 to 60 inches wide. A family bathroom may need that extra storage and a second sink, but proper sink spacing and drawer clearance still have to be measured in the actual room.
The best materials for custom bathroom vanity cabinets in Edmonton are moisture-resistant construction and well-sealed cabinet edges, especially around sinks. Health Canada recommends keeping indoor humidity between 30% and 50% and using moisture-resistant materials in bathrooms. Painted MDF Shaker doors, plywood boxes, and quartz tops are popular combinations. A floating vanity must be anchored securely; one Canadian Woodworking example uses ¾-inch plywood backing with lag bolts into two wall studs. The right choice depends on the room, the finish you want, and how much water the vanity will see.
Custom bathroom vanity cabinets in Edmonton generally take about 6 to 12 weeks from final design approval to installation, and consultations are usually booked within 2–3 business days. We do not publish a separate company timeline for vanities alone. A complete custom cabinet project can take roughly 14 to 22 weeks, which is useful for planning a bathroom renovation that includes a custom vanity. These figures should be confirmed after an on-site measure.